Charlotte, NC only · Commercial doors · Scheduled Service, Repairs & InstallsCall (984) 265-7937
Commercial Door Service Charlotte logo – Charlotte, NC Call (984) 265-7937
Charlotte, NC · Commercial doors only

Commercial Door Service in Charlotte, NCScheduled Service, Repairs & Installs

We repair, install, and maintain commercial doors for businesses inside Charlotte, North Carolina. That includes storefront entrances, hollow metal and fire-rated doors, closers, panic bars, locks, and automatic doors. Tell us what your door is doing and we'll fix it.

  • Charlotte city limits only
  • Commercial properties only
  • Urgent calls prioritized
Call for door service(984) 265-7937

Door Problem Finder

Pick what your door is doing. We'll tell you what's likely wrong.

11 services

Commercial door services in Charlotte

Every service below is for commercial properties inside Charlotte. Choose the one that matches your door, or call and describe the problem.

SVC-01

Commercial Door Repair

Doors that drag, sag, won't latch, or won't lock – diagnosed and fixed on the first visit whenever parts allow.

View service →
SVC-02

Storefront Door Repair

Aluminum and glass entrances: pivots, floor and overhead concealed closers, narrow-stile locks, and alignment.

View service →
SVC-03

Door Closer Repair

Slamming, leaking, or weak closers adjusted or replaced, with ADA closing speed and opening force set correctly.

View service →
SVC-04

Panic Bar & Exit Device Repair

Rim, vertical rod, and mortise exit devices repaired or replaced, including dogging, trim, and fire exit hardware.

View service →
SVC-05

Lock & Hardware Repair

Commercial locksets, cylinders, rekeying, hinges, strikes, and door hardware repaired or upgraded.

View service →
SVC-06

Hollow Metal Doors & Frames

Steel doors and frames repaired, re-prepped, or replaced, including rusted bottoms, sprung frames, and fire-rated openings.

View service →
SVC-07

Commercial Door Installation

New and replacement doors, frames, and hardware for storefronts, offices, warehouses, and fire-rated openings.

View service →
SVC-08

Automatic & ADA Door Repair

Automatic swing and slide doors, push-plate operators, and sensors repaired, adjusted, and safety-checked.

View service →
SVC-09

Fire Door Inspection & Repair

Annual NFPA 80 fire door inspections with written reports, plus repairs to close out deficiencies.

View service →
SVC-10

Emergency Door Repair

Doors that won't lock, won't close, or were damaged in a break-in or storm, secured fast and repaired properly.

View service →
SVC-11

Scheduled Door Maintenance

Planned visits that inspect, adjust, and lubricate every door so problems are caught before they become emergencies.

View service →
Commercial door installer leveling a door opening for a Charlotte, NC business
Every opening is set plumb, level, and square before hardware goes on.
Scope

Charlotte only. On purpose.

Most door companies cover a whole region and spend the day on the interstate. We made a different choice. We serve Charlotte, North Carolina, and nowhere else. Uptown, South End, NoDa, Plaza Midwood, Dilworth, SouthPark, Ballantyne, University City, and Steele Creek are all inside our service area. Surrounding towns are not.

That focus keeps drive times short, keeps parts on the truck that fit the doors we actually see, and makes the people who answer the phone familiar with Charlotte buildings: the glass towers Uptown, the brick storefronts in the older neighborhoods, the office parks, and the warehouses along I-85 and I-77.

Outside Charlotte?

We're not the right call. Our service area is Charlotte city limits only, so that customers inside the city get fast, consistent service.

Door types

Every kind of commercial door

If it's on a commercial building in Charlotte, we work on it, along with the frame, closer, and hardware that make it work.

Aluminum storefront

Narrow, medium, and wide stile entrances with pivots, concealed closers, and narrow-stile locks.

Hollow metal

Steel doors and frames for exits, back-of-house areas, stairwells, and warehouses.

Wood

Solid-core office and suite doors, usually hung in hollow metal frames.

Fire-rated

Labeled doors and frames with listed closers, latches, and exit hardware.

Automatic

Low-energy ADA swing operators and automatic sliding entrances.

All-glass

Frameless tempered-glass entrances with patch fittings and floor closers.

Who we serve

Built for Charlotte businesses

Different businesses wear out doors in different ways. We see them all across the city.

Restaurants & bars

Heavy entrance traffic, late closings, and back doors loaded with deliveries in South End, NoDa, and Plaza Midwood.

Retail storefronts

Aluminum entrances on Independence Boulevard, South Boulevard, and in Steele Creek that need to look good and lock every night.

Offices & multi-tenant

Lobby entrances, suite doors, and stairwells in Uptown, SouthPark, and Ballantyne.

Warehouses & industrial

Hollow metal man-doors and exits near I-85, I-77, and Billy Graham Parkway.

Medical & clinics

ADA operators, smooth closers, and fire-rated corridors around University City and the hospital campuses.

Schools, churches & venues

Exit devices and fire doors that see crowds and need to latch every time.

How it works

From phone call to working door

  1. Call

    Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.

  2. Diagnose

    A technician checks the whole opening: door, frame, hinges or pivots, closer, latch, and threshold. The symptom isn't always where the problem is.

  3. Quote

    You get a clear repair or replacement price before work starts. If a part has to be ordered, we make the door safe and secure first.

  4. Fix & test

    We repair, adjust, and cycle the door until it closes, latches, and locks on its own every time, then walk you through what we did.

Compliance

Charlotte code basics for commercial doors

Doors are life-safety equipment. These are the rules that come up most often on Charlotte service calls.

Fire doors – NFPA 80

Fire door assemblies must self-close and positively latch, and they need a documented inspection every year. Inside the city, fire inspections are carried out by the Charlotte Fire Department's Fire Prevention Bureau. Fire door inspection →

Accessibility – ADA

Where the 2010 ADA Standards apply, closers should take at least 5 seconds to close from 90° to 12°, and interior doors should need no more than 5 lbf to open. Door closer repair →

Egress – exit devices

Exit doors must open from inside without keys or special knowledge, and fire-rated exits need labeled fire exit hardware. Panic bar repair →

FAQ

Common questions

What areas do you serve?

Charlotte, North Carolina only. We don't serve surrounding towns. Staying inside the city is how we keep response times short and service consistent.

What types of commercial doors do you work on?

Aluminum storefront and glass entrances, hollow metal doors and frames, wood office doors, fire-rated doors, and automatic and ADA doors, plus all of their hardware.

How do I request service?

Call (984) 265-7937. Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.

Do you handle emergencies?

Yes. Doors that won't lock, exits that won't open, and break-in or storm damage are prioritized. We secure the opening first, then complete the permanent repair.

Do you work on residential doors?

No. We only service commercial doors at businesses, offices, institutions, and multi-family common areas in Charlotte.

Can you set up regular maintenance?

Yes. Scheduled maintenance visits inspect, adjust, and log every door so small problems are fixed before they turn into emergencies.

Door problem? Call it in.

Charlotte businesses only. No forms, no waiting for a callback. Talk to us now.

Call (984) 265-7937
Call (984) 265-7937