Lock & Hardware Repair
Commercial locksets, cylinders, rekeying, hinges, strikes, and door hardware repaired or upgraded.
View service →Panic bars keep people safe and buildings secure at the same time. When an exit device sticks, won't latch, won't dog down, or rattles loose, we repair or replace it with the right device for your door, including fire-rated exit hardware.
| Device types | Rim, surface vertical rod, concealed vertical rod, mortise |
|---|---|
| Trim | Lever, pull, thumbpiece, key-retract, dummy |
| Options | Hex or cylinder dogging, electric latch retraction, alarmed |
| Fire-rated | Labeled fire exit hardware (no mechanical dogging) |
| Where | Charlotte city limits only |

What we usually find when a Charlotte business calls about this, and what we do about it.
| Symptom | Likely cause | Fix |
|---|---|---|
| Bar sticks or is hard to push | Worn internal springs or a bent push pad | Service the mechanism or replace the device |
| Pair of doors won't latch | Vertical rods out of adjustment or bent | Re-adjust or replace the rods and latches |
| Bottom rod scrapes the floor | Rod has dropped or the bottom latch is worn | Re-set the rod, or convert to a less-bottom-rod device where allowed |
| Dogging won't hold | Worn dogging mechanism | Repair the dogging or replace the device |
| Key won't retract the latch | Broken trim connection or worn cylinder | Replace the trim or cylinder and re-time the connection |
The device has to suit the door. Single doors normally use a rim device that latches into a strike on the frame. Pairs of doors use vertical rod devices (surface or concealed) that latch at the top and bottom, or a rim device on each door with a removable mullion in the center. Higher-security and decorative openings may use a mortise exit device.
Concealed vertical rods are hidden inside the door, so failures are hard to spot. Bottom rods are the usual weak point, and they can wear quickly on doors that see cart or foot traffic. When appropriate, we recommend a mullion or a less-bottom-rod configuration so the problem doesn't keep coming back.
If your exit device is on a fire door, our fire door inspection service can check the whole assembly while we're on site.
Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.
A technician checks the whole opening: door, frame, hinges or pivots, closer, latch, and threshold. The symptom isn't always where the problem is.
You get a clear repair or replacement price before work starts. If a part has to be ordered, we make the door safe and secure first.
We repair, adjust, and cycle the door until it closes, latches, and locks on its own every time, then walk you through what we did.
Charlotte's restaurants, breweries, and event spaces in NoDa, Optimist Park, and South End use their exit doors hard. Rear doors get propped, loaded through, and pushed with carts. Warehouses and distribution buildings near I-85, I-77, and Billy Graham Parkway see pallet jacks and forklifts near doors, which bend rods and knock devices loose.
Exit devices are also an easy item for an inspector to flag. Doors that don't latch, have chained hardware, or are missing their fire exit label get noted during Charlotte Fire Department inspections. We fix these before they turn into a re-inspection.
Not sure? Call (984) 265-7937. We'll tell you honestly which one your door needs.
Usually the top rod or latch is out of adjustment, or a bent bottom rod is pulling the system out of time. We re-adjust or replace the rods so both latch points engage.
Not with mechanical dogging. Fire exit hardware has to latch every time the door closes. Electric latch retraction tied to the fire alarm may be an option where allowed.
Often, yes, if the device accepts trim. If it doesn't, we can replace the device with one that does.
No. Our service area is Charlotte city limits only.
Commercial locksets, cylinders, rekeying, hinges, strikes, and door hardware repaired or upgraded.
View service →Annual NFPA 80 fire door inspections with written reports, plus repairs to close out deficiencies.
View service →Doors that drag, sag, won't latch, or won't lock – diagnosed and fixed on the first visit whenever parts allow.
View service →Steel doors and frames repaired, re-prepped, or replaced, including rusted bottoms, sprung frames, and fire-rated openings.
View service →Charlotte businesses only. No forms, no waiting for a callback. Talk to us now.