Panic Bar & Exit Device Repair
Rim, vertical rod, and mortise exit devices repaired or replaced, including dogging, trim, and fire exit hardware.
View service →Commercial locks and hardware take more abuse than anything else on a door. We repair and replace Grade 1 locksets, mortise locks, cylinders, strikes, hinges, and electric strikes for Charlotte businesses, and rekey when keys walk out the door.
| Locks | Cylindrical and mortise locksets, narrow-stile deadlocks, deadbolts |
|---|---|
| Keying | Rekeying, interchangeable cores, master key systems |
| Hardware | Hinges, strikes, push/pull plates, flush bolts, coordinators, stops |
| Electrified | Electric strikes and electrified locks working with access control |
| Where | Charlotte city limits only |

What we usually find when a Charlotte business calls about this, and what we do about it.
| Symptom | Likely cause | Fix |
|---|---|---|
| Lever droops | Broken return spring inside the lockset | Replace the lockset with a heavy-duty Grade 1 lever |
| Key hard to turn | Worn cylinder or door misalignment loading the bolt | Re-align the door, then service or replace the cylinder |
| Latch misses the strike | Door sag or a worn strike | Re-square the door and adjust or replace the strike |
| Keys unaccounted for | Staff turnover | Rekey cylinders or swap interchangeable cores |
| Electric strike won't release | Misaligned strike or latch preload | Re-align the strike and check that the latch isn't binding |
Residential locks fail fast in commercial use. For busy doors we recommend ANSI/BHMA Grade 1 hardware, the highest commercial grade for cycle life and strength. Many problems that look like a "bad lock" are alignment problems, though. When a door sags, the latch drags on the strike and wears the lock out early. We fix the alignment first so the new hardware lasts.
When a manager leaves or a tenant changes, rekeying or swapping interchangeable cores is faster and cheaper than replacing locks. For multi-suite buildings we can set up a master key system so owners, managers, and tenants each carry only the keys they need.
Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.
A technician checks the whole opening: door, frame, hinges or pivots, closer, latch, and threshold. The symptom isn't always where the problem is.
You get a clear repair or replacement price before work starts. If a part has to be ordered, we make the door safe and secure first.
We repair, adjust, and cycle the door until it closes, latches, and locks on its own every time, then walk you through what we did.
Charlotte has new mid-rise construction in South End and along the LYNX Blue Line, older brick commercial buildings in Plaza Midwood, Elizabeth, and Dilworth, and a lot of 1980s and '90s office parks. Older buildings often have hardware preps that don't match today's standard locks, so we bring adapters and fill plates to make a clean upgrade without replacing the whole door.
Multi-tenant buildings in SouthPark and Ballantyne also turn over suites regularly. A quick rekey between tenants is one of the most common calls we get.
Not sure? Call (984) 265-7937. We'll tell you honestly which one your door needs.
If the locks work well, rekeying or swapping cores is the faster and cheaper way to lock out old keys. Replace locks that are worn, residential grade, or drooping.
Yes. We install and align electric strikes and electrified hardware, and we coordinate with your access control or alarm vendor for wiring and programming.
Usually because the door is out of alignment and the latch drags on the strike. We fix the alignment first, then install Grade 1 hardware.
No. We work only inside Charlotte city limits.
Rim, vertical rod, and mortise exit devices repaired or replaced, including dogging, trim, and fire exit hardware.
View service →Doors that drag, sag, won't latch, or won't lock – diagnosed and fixed on the first visit whenever parts allow.
View service →Aluminum and glass entrances: pivots, floor and overhead concealed closers, narrow-stile locks, and alignment.
View service →Planned visits that inspect, adjust, and lubricate every door so problems are caught before they become emergencies.
View service →Charlotte businesses only. No forms, no waiting for a callback. Talk to us now.