Commercial Door Installation
New and replacement doors, frames, and hardware for storefronts, offices, warehouses, and fire-rated openings.
View service →Hollow metal doors and frames are built to last, but forklifts, rust, and years of slamming still take a toll. We repair, re-prep, and replace steel doors and frames for Charlotte warehouses, schools, offices, and back-of-house exits.
| Doors | Flush, vision-lite, louvered, and fire-rated hollow metal |
|---|---|
| Frames | Knock-down and welded frames, drywall and masonry |
| Common damage | Rust at bottoms, impact dents, sprung frames, stripped preps |
| Fire-rated | Labeled doors and frames, NFPA 80 compliant work |
| Where | Charlotte city limits only |

What we usually find when a Charlotte business calls about this, and what we do about it.
| Symptom | Likely cause | Fix |
|---|---|---|
| Rusted bottom edge | Water and de-icer exposure at exterior doors | Replace the door (and the frame bottoms if they're rusted too) |
| Frame pulled out of the wall | Impact from equipment or failed anchors | Re-anchor and straighten, or replace the frame |
| Hinge screws won't hold | Worn or missing hinge reinforcement | Install through-bolts or reinforce the hinge preps |
| Door dented or bowed | Impact or slamming | Replace the door slab in the existing frame |
| Hardware doesn't fit | Old preps don't match current hardware | Re-prep the door or use fill plates and adapters |
A hollow metal opening is two parts: the frame, which is anchored into the wall, and the door, which hangs in it. When the frame is still sound, a new door slab prepped to match the existing hinges and strike is the fastest, least disruptive fix. When the frame is crushed or rusted at the base, we replace the frame, which in masonry walls can involve cutting it out and grouting the new frame in place.
We also re-prep doors for new locks and exit devices, add vision lites where allowed, and fit kick and armor plates to protect doors in high-traffic back-of-house areas.
Many hollow metal doors are fire-rated. You'll see a label on the hinge edge of the door and in the frame rabbet. Fire-rated assemblies can only be modified in ways allowed by NFPA 80 and the manufacturer's listing. Unapproved holes, welds, or patches can void the rating. We keep repairs within those limits and replace the assembly when they can't be met. See fire door inspection & repair.
Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.
A technician checks the whole opening: door, frame, hinges or pivots, closer, latch, and threshold. The symptom isn't always where the problem is.
You get a clear repair or replacement price before work starts. If a part has to be ordered, we make the door safe and secure first.
We repair, adjust, and cycle the door until it closes, latches, and locks on its own every time, then walk you through what we did.
Charlotte's warehouse and distribution buildings along I-85, I-77, and I-485, and around the airport off Billy Graham Parkway, rely on hollow metal man-doors beside their dock doors. Those doors get hit by pallet jacks, catch wind-driven rain, and sit in standing water at the threshold. That's exactly how bottoms rust out.
In schools, churches, and medical offices around the city, hollow metal frames carry heavy hardware and see constant traffic. Stripped hinge preps and sagging doors are the most common failures. Both are repairable when we catch them early.
Not sure? Call (984) 265-7937. We'll tell you honestly which one your door needs.
Yes, when the frame is sound. We order or prep a new door to match your existing hinge and strike locations.
Surface rust can be treated, but a door whose bottom has rusted through should be replaced. If the frame base is rusted too, it should be replaced at the same time.
Yes. We supply and install labeled fire-rated doors and frames with listed hardware, and we keep repairs within NFPA 80 limits.
No. Charlotte city limits only.
New and replacement doors, frames, and hardware for storefronts, offices, warehouses, and fire-rated openings.
View service →Annual NFPA 80 fire door inspections with written reports, plus repairs to close out deficiencies.
View service →Rim, vertical rod, and mortise exit devices repaired or replaced, including dogging, trim, and fire exit hardware.
View service →Doors that drag, sag, won't latch, or won't lock – diagnosed and fixed on the first visit whenever parts allow.
View service →Charlotte businesses only. No forms, no waiting for a callback. Talk to us now.