Hollow Metal Doors & Frames
Steel doors and frames repaired, re-prepped, or replaced, including rusted bottoms, sprung frames, and fire-rated openings.
View service →Fire doors only protect people when they close and latch on their own. We inspect fire door assemblies to NFPA 80, document what we find, and repair the deficiencies so your Charlotte building is ready for its fire inspection.
| Standard | NFPA 80, Standard for Fire Doors and Other Opening Protectives |
|---|---|
| Frequency | Annual inspection and testing, documented |
| Deliverable | Door-by-door report with location, findings, and status |
| Repairs | Closers, latching, gaps, labels, hardware, hold-opens |
| Where | Charlotte city limits only |

What we usually find when a Charlotte business calls about this, and what we do about it.
| Symptom | Likely cause | Fix |
|---|---|---|
| Door doesn't self-close | Closer missing, failed, or disconnected | Install or replace the closer and set it to close and latch |
| Door doesn't latch | Latch speed, strike alignment, or non-latching hardware | Adjust, re-align, or install listed latching hardware |
| Gaps too large | Door sag or a sprung frame | Re-hang the door or replace the assembly |
| Unapproved holes | Removed hardware left open holes | Fill with listed fasteners and filler or replace the door |
| Door propped open | Operational convenience | Install listed hold-opens released by the fire alarm |
NFPA 80 requires fire door assemblies to be inspected and tested at least once a year by someone with knowledge of the assemblies being inspected, and the results have to be documented. On each door we check things like:
You get a door-by-door report showing the location, the rating where it's legible, what passed, and what needs work. We then repair the deficiencies, which are usually closers, latching, gaps, and hardware, and re-test each door, so the report shows the openings as corrected. Doors that can't be brought into compliance within their listing are flagged for replacement with a labeled assembly.
Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.
A technician checks the whole opening: door, frame, hinges or pivots, closer, latch, and threshold. The symptom isn't always where the problem is.
You get a clear repair or replacement price before work starts. If a part has to be ordered, we make the door safe and secure first.
We repair, adjust, and cycle the door until it closes, latches, and locks on its own every time, then walk you through what we did.
Inside the city, fire code inspections are carried out by the Charlotte Fire Department's Fire Prevention Bureau. Stairwell doors in Uptown office towers, corridor doors in apartment buildings around South End, and fire-rated doors in schools, hotels, and medical buildings are all common places to find deficiencies, often doors wedged open or closers that were disconnected because the door was "too heavy."
A short inspection before your fire inspection and a round of repairs can keep a routine visit from becoming a re-inspection. We schedule around your occupancy so stairwells and exits stay usable.
Not sure? Call (984) 265-7937. We'll tell you honestly which one your door needs.
NFPA 80 calls for fire door assemblies to be inspected and tested at least annually, with written documentation kept for the authority having jurisdiction.
Not with wedges or kick-down stops. If a fire door needs to stay open, it should use listed hold-open devices that release when the fire alarm activates.
Yes. We repair closers, latching, gaps, holes, and hardware within the door's listing, re-test each door, and update the report.
No. Only inside Charlotte city limits.
Steel doors and frames repaired, re-prepped, or replaced, including rusted bottoms, sprung frames, and fire-rated openings.
View service →Rim, vertical rod, and mortise exit devices repaired or replaced, including dogging, trim, and fire exit hardware.
View service →Slamming, leaking, or weak closers adjusted or replaced, with ADA closing speed and opening force set correctly.
View service →Planned visits that inspect, adjust, and lubricate every door so problems are caught before they become emergencies.
View service →Charlotte businesses only. No forms, no waiting for a callback. Talk to us now.