Charlotte, NC only · Commercial doors · Scheduled Service, Repairs & InstallsCall (984) 265-7937
Commercial Door Service Charlotte logo – Charlotte, NC Call (984) 265-7937
SVC-11 · Charlotte, NC

Scheduled Commercial Door Maintenance in Charlotte

Most door emergencies start as small problems nobody reported. Scheduled maintenance puts a technician on every door at your Charlotte property on a set schedule to adjust, lubricate, tighten, and log each opening before it fails.

  • Charlotte city limits only
  • Commercial properties
  • Price before work starts
Call about a maintenance plan(984) 265-7937
Scheduled Door Maintenance at a glance
FrequencyQuarterly, semi-annual, or annual, set by traffic and door type
Every visitInspect, adjust, lubricate, tighten, and test each door
DeliverableDoor-by-door log with condition and recommended repairs
Good fitRetail, offices, multi-tenant, schools, medical, warehouses
WhereCharlotte city limits only
Technician performing scheduled maintenance on commercial door hardware in Charlotte, NC
Scheduled Door Maintenance for a Charlotte, NC business.
Diagnosis

Symptom, cause, fix

What we usually find when a Charlotte business calls about this, and what we do about it.

SymptomLikely causeFix
Door slowly starting to dragEarly hinge or pivot wearAdjust now; plan replacement before it fails
Closer drifting fasterValves drifting or early seal wearRe-tune and flag for replacement if it's leaking
Loose fastenersVibration and daily cyclingTighten and upgrade to through-bolts where needed
Pollen and grit in tracksSeasonal buildupClean thresholds, pivots, and sliding tracks
Worn seals and sweepsWeather and trafficReplace to keep conditioned air in and water out

What's included in a maintenance visit

  • Inspect each door, frame, hinge or pivot, closer, lock, and exit device
  • Adjust closer speeds, latching, and alignment
  • Lubricate hinges, pivots, locks, and exit devices
  • Tighten fasteners and check frame anchoring
  • Check seals, sweeps, and thresholds
  • Test automatic door actuators and sensors
  • Note fire door and accessibility issues

You get a door-by-door log showing what we adjusted, what's wearing, and what we recommend repairing or budgeting for. Repairs are quoted separately so you stay in control of spending.

Why scheduled service saves money

A closer that's adjusted before it starts leaking, a pivot replaced before the door drops, and a strike re-aligned before the lock wears out all cost less than an after-hours emergency call. A maintenance log also gives property managers a clear picture of which doors will need replacement next year, so there are fewer surprises in the budget.

Process

How a service call works

  1. Call

    Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.

  2. Diagnose

    A technician checks the whole opening: door, frame, hinges or pivots, closer, latch, and threshold. The symptom isn't always where the problem is.

  3. Quote

    You get a clear repair or replacement price before work starts. If a part has to be ordered, we make the door safe and secure first.

  4. Fix & test

    We repair, adjust, and cycle the door until it closes, latches, and locks on its own every time, then walk you through what we did.

Charlotte, NC

Built for Charlotte properties and seasons

We time visits around Charlotte's seasons: after spring pollen to clean tracks, thresholds, and pivots, before summer storms to check closers and arms, and before winter to replace seals and sweeps. Multi-tenant buildings in SouthPark and Ballantyne, retail centers in Steele Creek, and school and church campuses across the city all benefit from regular visits.

Because we serve only Charlotte, scheduled routes are tight and reliable, and when something does come up between visits, we're close by.

Decide

Repair or replace?

Repair makes sense when…

  • Doors are in working condition
  • You want fewer emergency calls
  • You need records for inspections or budgeting

Replace when…

  • Several doors are already failing; start with repairs, then a plan
  • Doors are being replaced in a renovation

Not sure? Call (984) 265-7937. We'll tell you honestly which one your door needs.

FAQ

Scheduled Door Maintenance questions

How often should commercial doors be serviced?

High-traffic entrances benefit from quarterly or semi-annual service. Lower-traffic interior doors are often fine with an annual visit. We recommend a schedule after the first walkthrough.

Does maintenance include fire door inspections?

Maintenance visits note fire door issues. A documented annual NFPA 80 fire door inspection can be scheduled alongside them.

Are repairs included in the maintenance price?

Adjustments, lubrication, and tightening are included. Parts and larger repairs are quoted separately for your approval.

Do you offer maintenance plans outside Charlotte?

No. Our maintenance plans are for properties inside Charlotte city limits.

Related

Related Charlotte door services

SVC-01

Commercial Door Repair

Doors that drag, sag, won't latch, or won't lock – diagnosed and fixed on the first visit whenever parts allow.

View service →
SVC-09

Fire Door Inspection & Repair

Annual NFPA 80 fire door inspections with written reports, plus repairs to close out deficiencies.

View service →
SVC-08

Automatic & ADA Door Repair

Automatic swing and slide doors, push-plate operators, and sensors repaired, adjusted, and safety-checked.

View service →
SVC-03

Door Closer Repair

Slamming, leaking, or weak closers adjusted or replaced, with ADA closing speed and opening force set correctly.

View service →

Door problem? Call it in.

Charlotte businesses only. No forms, no waiting for a callback. Talk to us now.

Call (984) 265-7937
Call (984) 265-7937