Door Closer Repair
Slamming, leaking, or weak closers adjusted or replaced, with ADA closing speed and opening force set correctly.
View service →When a door at your Charlotte business drags, sags, won't latch, or won't lock, you need it working before close of business. We repair every part of a commercial opening, from hinges and pivots to closers, latches, frames, and thresholds.
| Door types | Aluminum storefront, hollow metal, wood, fire-rated, glass |
|---|---|
| Common causes | Worn hinges or pivots, failed closers, loose frames, misaligned strikes |
| Typical visit | Diagnosis and most adjustments in one trip |
| Parts on the truck | Hinges, closer arms, strikes, fasteners, sweeps, weatherstrip |
| Where | Charlotte city limits only |

What we usually find when a Charlotte business calls about this, and what we do about it.
| Symptom | Likely cause | Fix |
|---|---|---|
| Door scrapes the threshold | Worn hinge knuckles or a sagging pivot let the latch side drop | Replace hinges/pivot, re-shim, and re-square the door in the frame |
| Door won't latch | Closer latch speed too fast or too slow, or the strike is out of line | Adjust the closer valves and re-align or replace the strike |
| Lock is hard to turn | Door has shifted so the bolt binds on the strike | Square the door, then fine-tune the strike pocket |
| Screws won't hold | Stripped holes in the frame or door edge | Through-bolts, sex bolts, or new hinge reinforcement |
| Daylight around the door | Sprung frame or worn weatherstrip | Re-anchor the frame and replace seals and sweeps |
A commercial door is an assembly: the door, the frame, the hinges or pivots, the closer, the latching hardware, and the threshold all have to work together. A door that won't latch might have a perfectly good lock. The real problem is often a sagging hinge, a closer set too fast, or a frame that's been knocked out of square by a hand truck. We look at the whole opening before we replace anything.
We repair aluminum storefront entrances, hollow metal doors and frames, solid-core wood doors, fire-rated openings, and the hardware on all of them. Whether it's an Uptown office tower, a South End restaurant, or a warehouse off I-85, the work is the same: find the cause, fix it properly, and leave a door that closes and locks on its own.
You get the price before work begins. If several doors need attention, we quote them together so you're not paying for multiple trips.
Tell us the address, which door, and what it's doing. A photo texted after the call helps us bring the right parts.
A technician checks the whole opening: door, frame, hinges or pivots, closer, latch, and threshold. The symptom isn't always where the problem is.
You get a clear repair or replacement price before work starts. If a part has to be ordered, we make the door safe and secure first.
We repair, adjust, and cycle the door until it closes, latches, and locks on its own every time, then walk you through what we did.
Charlotte's long, humid summers and quick temperature swings make doors and frames move through the year. Wood doors swell, aluminum expands in afternoon sun, and a door that closed fine in March can bind by July. Spring brings a heavy layer of pine pollen that settles into pivots, thresholds, and sliding tracks and acts like grit. Summer thunderstorms add wind gusts that catch an open door and strain the hinges and closer arm.
Then there's traffic. A busy entrance on South Boulevard or a coffee shop near a LYNX Blue Line station can cycle hundreds of times a day. Hardware made for a back office won't last at that rate, so we match replacement parts to how hard your door actually works.
Not sure? Call (984) 265-7937. We'll tell you honestly which one your door needs.
Call and tell us what the door is doing. Urgent problems, such as a door that won't lock or won't close, are prioritized, and many repairs are finished on the first visit.
Yes. We repair and adjust hinges, pivots, closers, strikes, and latches, re-anchor loose frames, and replace frames when they can't be saved.
No. We only serve businesses inside Charlotte city limits. That focus is what keeps our response times short.
Usually, yes. Most latching problems come from closer speed, hinge wear, or strike alignment, not the lock itself.
Slamming, leaking, or weak closers adjusted or replaced, with ADA closing speed and opening force set correctly.
View service →Aluminum and glass entrances: pivots, floor and overhead concealed closers, narrow-stile locks, and alignment.
View service →Commercial locksets, cylinders, rekeying, hinges, strikes, and door hardware repaired or upgraded.
View service →Doors that won't lock, won't close, or were damaged in a break-in or storm, secured fast and repaired properly.
View service →Charlotte businesses only. No forms, no waiting for a callback. Talk to us now.